Can You Use Masonry Paint On Tiles? (Make The Right Choice)

Masonry paint is a type of paint that is designed to use on rigid surfaces like concrete, brick, or stones. This type of paint comes in a variety of finishes, such as coarse, textured matt finish, satin, and gloss finish. As this paint is designed to be used on rough surfaces, you may have this question in mind if you can use Masonry paint on Tiles.

You can use Masonry paint on tiles. Before painting, preparing the surface is mandatory. Proper surface preparation will give you a better finish and make the paint adhere better to the surface.

If you use masonry paint on floor tiles, you will notice that the paint is not adhering well to the surface and is also likely to fade and peel off the tiles if you don't prepare the tiles for painting beforehand.

Can You Use Masonry Paint On Roof Tiles?

Can You Use Masonry Paint On Tiles
Masonry paint on roof tiles second coat

Yes, you can use Masonry paint on roof tiles. Masonry paint is designed to use on concrete, and most of the roof tiles are made of concrete apart from slate tiles.

Moreover, this paint is particularly designed to be used on exterior surfaces. So it is possible for the paint to adhere better to the roof tiles.

However, you will need to repaint the tiles after a certain period. The roof endures more elements than other sections of your home, such as direct sunlight or rainfall. So, you cannot expect the paint to sustain a long time on the surface.

Repainting your roof can be a more daunting task than repainting your wall. So, it is better to reconsider this fact whether you should use Masonry paint on roof tiles or not.

How To Prepare The Surface For Painting?

If you have decided to use Masonry paint on your roof tiles by now, you must know how to prepare the surface for painting.

Preparing the surface before painting is very important for any painting job. Otherwise, you won’t get the desired finish, and your paint will not adhere to the surface.

To prepare the surface:

● Clean the surface nicely and make sure there is no dirt or debris on it.

● If possible, scrutinize the surface. If you see any uneven surface, sand the surface lightly to make it smooth.

● After sanding the surface, wash it with clean water.

● Let the tiles dry before using paint on them.

Washing the surface with clean water
Washing roof surface

After the surface is clean and dry, apply the paint. Apply two to three coats of paint on the tiles.

Let the paint dry after each coat before painting the second coat.

Note:

You must check your local building codes to see whether you can paint roof tiles in your area. Some areas may have special requirements for painting tiles.

Can You Paint Indoor Tiles With Masonry Paint?

You can paint indoor tiles with masonry paint. You need to follow some instructions and choose the right type of masonry paint for painting indoor tiles.

● You must clean the tiles and dry the surface before applying the paint.

Cleaning Tile surface
Cleaning Tile surface

● It is better if you can use a deglosser or sand the tiles lightly before painting them. This will increase the paint’s adhesion to the surface.

● Make sure to use good quality oil-based masonry paint specially produced for tiles.

● Apply two to three coats of paint and allow each coat to dry completely before applying another coat.

● Use a primer or sealer in the bathroom if you are painting a high-traffic area or the surface is exposed to water.

Applying primer on tiles
Applying primer on tiles

It is important to note that you cannot use Masonry paint on tiles that have a high-gloss finish.

These types of paint are not porous, and the paint will not adhere better. For such tiles, it is better to choose a tiles-specific paint.

Masonry paint can be used on different types of surfaces. You can even paint terracotta pots with masonry paint.

Is It Necessary To Use A Primer For Painting Tiles?

Experts always suggest that we should use a primer or sealer before painting tiles.

A primer will increase the adhesion of the paint, and also it will make the paint look vibrant. If you are painting a high-traffic area or a place that is exposed to water, such as a bathroom, it is recommended that you should use a primer or sealer.

You need to make sure that you are using a primer that is specifically designed for masonry surfaces.

How to Ensure a Long-Lasting Finish on Tiles with Masonry Paint?

To ensure that your masonry paint lasts long on the tiles, it is important to prepare the surface before starting to paint. Prepare the surface in the aforementioned way.

Choose a high-quality paint that is very durable and resistant to fading, peeling, or chipping.

Using a primer, as I mentioned earlier, will make the paint last longer on the surface.

When painting the surface, make sure to apply multiple coats. Multiple coats will help the paint to improve its durability and resistance to wear and tear.

After you finish painting, let the paint dry completely. After the paint has dried, apply a clear sealant to protect the paint and also increase its durability and lifespan.

Also, make sure to clean and maintain the tiles regularly. Regularly cleaning the surface will keep dirt and grime away, which will wear down the finish over time and fade the color. When cleaning, avoid using harsh chemicals or abrasive cleaning tools. Otherwise, you will end up damaging the paint.

Conclusion:

I hope you get the answer to the question of whether you can use Masonry paint on tiles or not.

When you can use Masonry paint on tiles, it is important to keep the manufacturer’s instructions in mind.

Preparing the surface is very important. If you are using the paint on roof tiles, the surface may need to be repainted after a certain period of time. This can cost you a lot of effort and hard work.

If you paint your indoor tiles with masonry paint, see first if your tiles are high-gloss or not. High-gloss tiles are not porous, and you will need to use a deglosser or sand the surface lightly to increase the adhesion of the paint.